PreSonus® is shipping its new Temblor T10 subwoofer. Designed to complement full-range studio reference monitors-including the PreSonus Eris™ and Sceptre™-without overshadowing them, the T10 is intended for serious personal studios and professional music-production environments, offering a tight low end due to fast and accurate transient response and providing user controls not normally available in this price range.
The new subwoofer sports left and right, balanced XLR and ¼” TRS and unbalanced RCA main inputs; if both XLR and TRS inputs are connected, the TRS input takes precedence. The T10 has left and right balanced XLR and ¼” TRS outputs and an extra subwoofer output for connecting a second T10.
Extensive user controls include input gain (-30 dB to +6 dB, continuously variable) and a continuously variable lowpass filter (50 Hz to 130 Hz) that allows users to create a seamless crossover transition between their full-range studio monitors and subwoofer for a more accurate listening environment. A switchable highpass filter removes frequency content below 80 Hz from the full-range signal sent from the T10 outputs to the main monitors, avoiding destructive cancellation and reinforcement in the T10’s upper range.
The T10 also features a momentary footswitch (included) that bypasses the subwoofer, highpass filter, and Sub Out. This allows the audio source signal to pass directly through the Temblor T10 to the full-range studio monitors, enabling you to compare your mix with and without subharmonic frequencies to ensure your mix will sound good on a wide variety of systems.
You also get polarity invert and a ground-lift switch. The 15.75″ x 15.75″ x 12.6″ (400 x 400 x 320 mm), 39.5 lb. (17.9 kg) enclosure has integrated, gravity-calibrated rubber feet for stable placement.
The Temblor T10 is available immediately. Expected MAP/street price is $399.95. For more information, visit www.presonus.com/products/